Your John Deere records, in your grain book.

If your fields, harvest and field work are already in John Deere Operations Center, you don’t type them in again. Connect it once in GrainPosition, read-only. The yield monitor’s harvest is set against your scale tickets and bins, and your seeding and spray passes go into Field work.

What comes in, and where it goes

From Operations CenterGoes intoWhat comes with it
FieldsFieldsEach field’s boundary and acres. A field bigger than a section goes on its quarter. Satellite and radar read its outline like any other field. Alberta, Saskatchewan and Manitoba.
HarvestPlan and ProfitThe yield monitor’s crop, acres, yield and moisture. It stands in as the harvest of each field you haven’t recorded a harvest on, and counts in profit by field once harvest is marked finished.
SeedingField workVariety, rate and acres, on the field’s crop.
Spraying and fertilizerField workProduct or tank mix, rate, water and acres. A product named like one of your inputs in the shed comes off what’s on hand.
MachinesEquipmentName, make, model, year and type, with engine hours where the machine has JDLink.

Fall seeding and work after harvest go on next year’s crop. A pass you typed in yourself that the machine also recorded is counted once, not twice. While it’s connected, GrainPosition reads Operations Center again by itself about once a day, so it keeps up without the app open.

Fill my plan. One button puts every field the yield monitor harvested into the year’s plan, on its crop, with its acres and the monitor’s yield. It’s taken back out the same way.

Three numbers, side by side

For each crop, the season card puts what the combine measured next to what went to the elevator and what’s still in the bins, with the difference.

Yield monitor

What came off

The harvest from Operations Center, by field.

Scale tickets

What was delivered

Your loads, from a photo of each ticket or typed in. Scale tickets

Bins

What’s left

What’s in each bin, by crop and crop year. Bin inventory

A yield monitor is an estimate. It needs calibrating, and it reads wet grain. Tickets and bins are what you’ll actually sell, so GrainPosition shows the difference rather than picking one.

How to connect

  1. In GrainPosition, open Settings, then DataPress Connect John Deere. The farm’s owner or family can connect it.
  2. Sign in to John Deere and allow GrainPositionOn John Deere’s own pages, choose your organization and give GrainPosition access. Your John Deere password never reaches GrainPosition. If John Deere shows its list of connections instead, go back and press Connect John Deere again. Once you’re signed in, it goes straight to the permission page.
  3. Back in GrainPosition, it reads your recordsThe first read can take a while on a big farm. It carries on without the app open.

Read-only, and yours to disconnect

Nothing is ever sent back to Operations Center or changed there. John Deere’s sign-in tokens are kept encrypted with your farm. To disconnect, go to Settings, Data. That removes the tokens and the fields and harvest brought in. Fields, machines and field work passes stay in Fields, Equipment and Field work as your own, with your notes and service log, and stop updating. You can also remove GrainPosition from your connections in Operations Center. The privacy policy lists exactly what is read.

Questions

Does GrainPosition write anything back to John Deere Operations Center?

No. The connection is read-only. Nothing is sent back to Operations Center or changed there.

Does the John Deere connection cost extra?

No. It is part of GrainPosition, which is free during early access.

How do I disconnect John Deere?

In GrainPosition, Settings, Data. That removes John Deere’s sign-in tokens and the fields and harvest brought in. Fields, machines and field work passes stay in Fields, Equipment and Field work as your own and stop updating. You can also remove GrainPosition from your connections in Operations Center.

Does it connect to Climate FieldView or other farm software?

Not yet. John Deere Operations Center is the only connection today. Everything in GrainPosition exports as CSV.

Is GrainPosition made by John Deere?

No. GrainPosition is independent, built in Winnipeg, Manitoba. It connects to Operations Center through John Deere’s own sign-in, with the farm’s permission.

Bring your John Deere records into a grain book

GrainPosition keeps your contracts, loads, bins and settlements, and checks each settlement against its contract and tickets. It’s in free early access, and I’ll help you get your book in.

Set up my grain book Look around a sample farm

John Deere and Operations Center are trademarks of Deere & Company. GrainPosition is not made by or affiliated with John Deere.

Check a grain settlement from a photo

Upload a photo or PDF to see the settlement's figures explained and checked. Add the contract to compare its price, grade and freight.

Check a settlement photo

Free, no account. Review the extracted figures before checking. Documents are processed by Anthropic and are not stored. Privacy